FOOTBAG FILL GUIDE

Everything about footbag fill — types, weights, mixes — plus a calculator to dial in your exact amounts.

Bag Diameter
2.00in
Volume Correction0.79
Fill Weight
65.0g
Fill Level
69%
Steel (4.6 g/mL)
52.0g
Rubber Crumb (0.46 g/mL)
7.0g
Plastic Pellets (0.55 g/mL)
6.0g

Results

Bag Size
2.00in
Fill Level
69%
37.4 / 54.2 mL
Fill Weight
65.0g
Steel
52.0g
80%
Rubber
7.0g
11%
Plastic
6.0g
9%

Need fill? We sell stainless steel, rubber crumb, and plastic pellets.

SHOP FILL MATERIALS

The Complete Footbag Fill Guide

Everything you need to know about filling a footbag — from choosing fill types to dialing in your weight. Based on decades of community knowledge from competitive freestyle players and professional stitchers.

How to Use This Calculator

Set your footbag diameter (most freestyle bags are 1.8"–2.2"), then adjust the fill weights in grams. The calculator shows you how much volume each fill type takes up and whether it all fits in your bag. Use the fill weight slider to scale all fills proportionally, or the fill level slider to target a specific fullness. This works for any sand-filled hacky sack or multi-fill footbag.

Understanding Fill Level

Fill level is how full the bag is as a percentage of internal volume. Higher fill levels make the bag firmer and rounder — good for sets and pops. Lower fill makes the bag softer and easier to stall — it drapes over your foot and stays put. Fill level is personal preference and varies widely across players and play styles.

0%
100%
Softer, drapes moreFirmer, rounder

Fill Types

Several fill materials are used in footbags, each with different density, feel, and trade-offs. The three most common are stainless steel for weight, and plastic pellets or rubber crumb for volume.

Stainless steel 1.6mm shot fillStainless steel disc fill

Stainless Steel Shot

4.6 g/mL

The most popular weight filler in modern footbags. Stainless steel is dense, non-toxic, and doesn't degrade inside the bag. It gives weight without taking much space, so most of a bag's mass comes from steel. Size #7–#9 shot (around 1.5–2mm diameter) is typical. Always use stainless — 304 or 409 grade — because non-stainless (zinc-plated carbon steel) eventually rusts inside the bag, especially if you sweat on it and don't dry it after washing.

Disc filler (flat discs instead of spheres) is another option that some stitchers prefer. The discs pack differently, sit well inside the bag, and may improve over time as the edges polish against each other.

SHOP STEEL FILL
Plastic poly pellets fill

Plastic Poly Pellets

0.55 g/mL

Lightweight filler that adds volume and body without much weight. Poly pellets help fill out the bag so it doesn't feel sloppy or empty once it breaks in. They extend bag life by cushioning the heavier metal fill, and give the bag a softer, more forgiving feel. Bags without some kind of volume filler tend to get too loose over time as the fabric stretches. Poly pellets look like tiny cloudy plastic beads — the same material used in weighted blankets and stuffed toys.

SHOP PLASTIC FILL
Rubber crumb fill

Rubber Crumb

0.46 g/mL

Ground rubber granules add responsiveness and a softer feel. Like plastic pellets, rubber crumb is a volume filler that helps maintain the bag's shape. It gives the bag a slightly different texture compared to plastic — a bit grippier and more cushioned. Some players prefer the way rubber settles inside the bag versus how plastic pellets distribute.

SHOP RUBBER FILL

Tungsten Shot

The densest common fill material — even heavier than steel by volume. Tungsten is non-toxic and allows you to make very small bags (mini/golf-ball size) at a playable weight where steel alone wouldn't be heavy enough. The downside is cost: tungsten shot typically runs 10–15x the price of steel. Some top stitchers use tungsten in every bag; most reserve it for minis or mix a small amount with steel for a weight boost.

Bismuth Shot

Denser than steel but lighter than tungsten, and non-toxic. Bismuth sits in between as a premium fill option — more affordable than tungsten but still significantly more expensive than steel. It's more commonly available in Canada and hunting-supply stores. A good option if you want a heavier-than-steel bag without the full tungsten price.

Glass Seed Beads

Tiny glass beads used as a volume filler. They add some weight and take up space, but the community consensus is mixed — seed beads can shatter inside the bag, and the broken glass fragments accelerate wear on the fabric from the inside. With dense metal fills like steel or tungsten, the combination can be rough on bags. Many experienced stitchers have moved away from seed beads in favor of plastic pellets or rubber crumb.

Sand

The cheapest, oldest footbag fill. Sand-filled bags (the classic "hacky sack") are dead-soft and easy to stall — they drape over your foot with almost no bounce. This makes them forgiving for beginners learning basic kicks and stalls. But sand bags don't pop or set well, which limits their use for freestyle tricks. Sand also wears through fabric fast, especially at the seams. For serious play, dedicated fill materials are a significant upgrade.

Weight — How Heavy Should Your Bag Be?

Most freestyle players today prefer bags in the 60–70 gram range, with 65g being a common target. The community has shifted heavier over the years as players found that more weight gives better control for technical tricks. Your ideal weight depends on your play style, the tricks you focus on, and your shoes.

40–55g
Light

Personal preference. Common for kicking bags that are mainly plastic or rubber filled.

60–70g
Freestyle Standard

The range most competitive players settle into. Heavy enough for strong stalls, controlled sets, and predictable drops. 65g is the most common target.

70–80g+
Heavy Preference

Rock-solid stalls and very predictable flight paths. Heavy bags land exactly where you expect them but require more effort to set and keep in the air during long rallies.

Mixing Fill — Why It Matters

Small bags (2.0" and under)

Steel-only fill works great for freestyle — 65g of steel in a compact 32-panel bag gives solid stalls and predictable drops without needing anything else. Many players prefer the clean, dense feel of pure steel.

Larger bags

Mixing becomes important. A bigger shell needs more volume to avoid feeling empty, but filling it entirely with steel would make it too heavy. Adding a volume filler (plastic pellets or rubber crumb) lets you fill out the bag without adding much weight. The dense fill controls how heavy the bag is; the volume fill controls how full it feels and how well it holds its shape over time.

Recommended Starting Mixes

Standard Freestyle
32p, 1.9"–2.0"
65g steel

Steel-only works well at this size — dense, compact, great for stalls. Or mix 50–55g steel + 8–12g plastic pellets or rubber crumb for a softer feel with more body.

Mini Bag
32p, 1.7"–1.8"
tungsten + steel mix

Use tungsten instead of (or mixed with) steel to hit 60–65g in a smaller volume. Pure steel won't get heavy enough in a mini without overfilling.

14-Panel Bag
2.0"–2.2"
45–50g steel12–18g volume

14-panel bags have more internal volume (fewer seams, panels bulge more), so they need more volume filler to avoid feeling empty.

Kicking / Casual
30–35g steel15–20g plastic

Heavier on volume fill, lighter overall. A softer, slower bag that's easy to control.

How Fill Affects Play Style

More metal, less volume fill

Compact, heavy feel. Predictable drops, snappy sets, harder stalls. Good for technical freestyle with lots of dexterity tricks.

Balanced mix

Versatile. Works for both stalling and setting. The most popular configuration for a reason.

More volume fill, less metal

Soft, forgiving. Easy stalls (the bag drapes over your foot), but less pop on sets. Better for casual play and learning.

Overfilled (>70%)

The bag is too firm, rolls off your foot during stalls, hard to control. Try removing some fill.

Low fill (<30%)

Very soft and drapey — the bag conforms to your foot easily for stalls. Less pop on sets and harder to predict on kicks. Some freestyle players prefer this feel.

Common Fill Mistakes

Using non-stainless steel

Regular zinc-plated steel shot rusts inside the bag when it gets wet from sweat or washing. It can ruin a bag from the inside. Always use stainless steel — 304 or 409 grade.

No volume filler

Metal-only bags feel like marbles and break in poorly. The bag gets sloppy over time as the fabric stretches but the fill stays compact. Always include some plastic pellets or rubber crumb.

Steel + seed beads

This combination is hard on bags — the glass beads shatter against the dense steel, and the fragments cut the fabric from the inside. Use plastic pellets or rubber crumb instead.

Not drying after washing

Even stainless steel bags should be dried promptly after washing. Pat dry with a towel and air dry completely before playing. Never play with a wet bag — wet seams stretch and weaken.

Fill that's too large

Shot or pellets larger than ~2.5mm diameter won't settle properly inside the bag. You want fill small enough to flow and conform to the bag's shape. #7–#9 shot size (1.5–2mm) is the sweet spot.

About the Densities

The bulk densities used in this calculator were measured by pouring each fill type into a container and weighing it — so they include the air gaps between pellets, which is what matters when filling a bag. Material density (how dense a single pellet is) would be higher, but bulk density tells you how much space a pile of fill actually takes up inside your footbag.

Fill TypeBulk Density
Stainless Steel4.584 g/mL
Plastic Pellets0.552 g/mL
Rubber Crumb0.462 g/mL

How we got these numbers. We measured the densities ourselves, by weighing a known volume of each fill — settled, not packed, since that is how fill sits in a finished bag. The panel correction factors come from comparing the calculated volume of a true sphere against the fill a real bag actually takes at a given diameter, across bags from our stitchers. Figures are specific to the materials we sell; other steel shot or crumb will differ, so weigh your own if you are using something else.

Panel Count and Fill

The number of panels affects internal volume. 14-panel bags are closer to a true sphere (correction factor 0.94) — the panels are larger and bulge more, creating more space inside. 32-panel bags have more seam material eating into the internal volume (correction factor 0.79), so the same diameter bag holds less fill. This means a 32-panel bag needs less total fill by volume to reach the same fill level as a 14-panel bag of the same diameter.

14p
CF 0.94
more volume
vs
32p
CF 0.79
less volume

Custom Correction Factor

The calculator uses a correction factor to account for the difference between a perfect sphere and a real sewn bag. If you want an exact factor for your specific bag, use the tool below to measure it — fill your bag completely, weigh the fill, and enter the values.

Measure Your Bag

To get an accurate correction factor for your specific bag, fill it completely with any fill type, then measure the total volume of fill using a measuring cup or measuring spoons. Enter the bag diameter and measured volume below.

in